- DLA模型中提高模擬結果可靠性的研究
Study on Heightening Reliability of Simulating Results in DLA Models
- 實踐證明 ,模擬結果同實際澆鑄過程比較吻合
The simulation result is in good agreement to the actual filling process.
- PSPICE模擬結果表明 ,當電源電壓為± 2 V時 ,該輸入級的共模輸入範圍為 -2 V~ +2 V.
Under the condition that the power supply is ±2V, CMR is -2V~+2V.
- 數值模擬結果符合物理規律。
The simulation result coincided with the law of physics.
- 鑄件凝固過程模擬結果的三維OpenGL顯示
3D OpenGL Display during Simulation of Solidification Process of Castings
- 模擬結果得出如下結論:標準k-ε模型對系統流動模擬是適合的;
The normal k-ε model is adaptive to simulate the air flow;
- 有限元模擬結果和實驗結果具有較好的相符性。
The simulated results agree to the experiment.